Air delivery chute
- Brief introduction
Air delivery chute is a kind of pneumatic and conveying equipment that is widely used to convey dry and powder material. It is used to convey cement and raw material powder here. Air delivery chute is characterized by easy maintenance, good sealing, no noise, safe operation, low electric consumption, convenient to divert. It is widely used to charge and discharge at multi-points because there is no driving parts for it. The main part of Air delivery chute is ventilated layer. Air delivery chute use a new type ventilated layer of PET-6 (terylene) compound fiber textile, which is It is characterized by high temperature resistant (centigrade150), anti-corrosive, anti-abrasion, low moisture absorption, light weight, level surface and long life.
- Technical capacity
Conveyed material: water content≤1%, temperature≤150℃ dry and powder material
Conveyed capacity: When conveying cement and raw material, the capacity is as the
following:
- Technical parameter
| Specification | XZ200 | XZ250 | XZ315 | XZ400 | XZ500 | XZ630 | XZ800 | |||
| Trough width | m m | 200 | 250 | 315 | 400 | 500 | 630 | 800 | ||
| Conveying capacity | a=4° | Cement | T/h | 22 | 40 | 70 | 130 | 220 | 320 | 400 |
| Raw material | 16 | 30 | 55 | 100 | 165 | 245 | 310 | |||
| a=6° | Cement | 40 | 65 | 120 | 250 | 400 | 610 | 765 | ||
| Raw material | 30 | 55 | 90 | 185 | 300 | 455 | 565 | |||
| a=8° | Cement | 50 | 80 | 140 | 300 | 470 | 720 | 900 | ||
| Raw material | 35 | 65 | 110 | 225 | 355 | 540 | 670 | |||
| a=10° | Cement | 60 | 100 | 170 | 380 | 570 | 900 | 1080 | ||
| Raw material | 45 | 80 | 140 | 285 | 425 | 670 | 800 | |||
| a=12° | Cement | 70 | 120 | 205 | 455 | 685 | 1080 | 1295 | ||
| Raw material | 50 | 95 | 165 | 340 | 510 | 805 | 960 | |||
| Trough section length | Standard section | m m | 2000 | |||||||
| Nonstandard section | m m | 250 | ||||||||
| Pressure needs | KPa | 4-5.5 | ||||||||
| Needed amount of wind | m3/m2.min | 1.5-2 | ||||||||
| Breathable layer | material quality | Synthetic fiber | ||||||||
| Thickness | m m | 4-6 | ||||||||
| Temperature resistance | ℃ | 150 | ||||||||
| Radial fracture strength | N/cm Wide | 4700 | ||||||||
| Resistance | Pa | 800-1200(In 2m3/m2.min conditions) | ||||||||
| Code | a2 | b2 | e2 | f2 | m2 × R2 | n2 × R2 | N – Φ3 | d1 | d2 | d3 | n-Φ2 | d4 | d5 | d6 | n- Φ 4 |
| Model | |||||||||||||||
| XZ200 | 206 | 206 | 286 | 286 | 3 × 82 | 3 × 82 | 14 － Φ12 | 108 | 152 | 188 | 4 － Φ 12 | Φ130 | Φ160 | Φ190 | 6 － Φ 12 |
| XZ250 | 256 | 256 | 336 | 336 | 4 × 75 | 4 × 75 | 16 － Φ12 | 108 | 152 | 188 | 4 － Φ 12 | Φ135 | Φ170 | Φ205 | 6 － Φ 12 |
| XZ315 | 321 | 321 | 401 | 401 | 5 × 73 | 5 × 73 | 20 － Φ12 | 260 | 225 | 260 | 6 － Φ 12 | Φ190 | Φ225 | Φ260 | 8 － Φ 12 |
| XZ400 | 406 | 406 | 486 | 486 | 6×75 | 6×75 | 24－Φ12 | 315 | 280 | 315 | 8－Φ12 | Φ245 | Φ280 | Φ315 | 8－Φ12 |
| XZ500 | 506 | 506 | 586 | 586 | 7×79 | 7×79 | 28－Φ12 | 340 | 305 | 340 | 8－Φ12 | Φ270 | Φ305 | Φ340 | 8－Φ12 |
| XZ630 | 638 | 638 | 738 | 738 | 8×86 | 8×86 | 32－Φ14.5 | 405 | 370 | 405 | 12－Φ12 | Φ355 | Φ395 | Φ435 | 12－Φ12 |
| Code | a1 | b1 | e1 | f1 | m1×R1 | n1×R1 | n-Φ1 | ||||||||
| Model | TypeI | TypeⅡ | TypeI | TypeⅡ | TypeI | TypeⅡ | TypeI | TypeⅡ | TypeI | TypeⅡ | TypeI | TypeⅡ | TypeI | TypeⅡ | |
| XZ200 | 120 | 200 | 120 | 150 | 210 | 280 | 210 | 230 | 2×86 | 4×63 | 2×86 | 3×66 | 8－Φ14.5 | 14－Φ12 | |
| XZ250 | 150 | 250 | 150 | 200 | 240 | 330 | 240 | 280 | 3×70 | 4×70 | 3×70 | 3×83 | 12－Φ14.5 | 14－Φ12 | |
| XZ315 | 150 | 250 | 150 | 250 | 240 | 330 | 240 | 330 | 3×70 | 4×75 | 3×70 | 4×75 | 12－Φ14.5 | 16－Φ12 | |
| XZ400 | 150 | 315 | 150 | 315 | 240 | 395 | 240 | 395 | 3×70 | 5×73 | 3×70 | 5×73 | 12－Φ14.5 | 20－Φ12 | |
| XZ500 | 200 | 400 | 200 | 400 | 290 | 480 | 290 | 480 | 3×88 | 6×75 | 3×88 | 6×75 | 12－Φ14.5 | 24－Φ12 | |
| XZ630 | 200 | 500 | 200 | 500 | 290 | 580 | 290 | 580 | 3×88 | 7×79 | 3×88 | 7×79 | 12－Φ14.5 | 28－Φ12 | |